How To Take A Lv. 10 Valley

Intro:
There are many ways to take a level 10 valley. Through out this guide, I will show you the exact minimum amount of troops to send to a valley, with the minimum attack hero to take it with 0 losses. There is also a better drop rate of medals when attacked with these certain attributes. This approach with zero losses can only happen with a level 10 valley with ONLY archers. Otherwise you will have minor losses.




The Attack:
Tested and proven, you should send exactly 19K archers, with Hero with 100 attack. This is the MINIMUM you should send if you expect to get zero losses. I have spent the last week trying different variations, with more troops, and less attack, and vice versa.




Medal Drop Rate:
The medals you are most likely to get are honor. With a test of about 200 attacks (different members attacked with the same attributes), using the amount of troops and attack warrior as shown above, we got 30 honor medals, 13 liberty, 2 wisdom, and 14 justice. (we also got a mikes script or two =D) I say our server has a slightly lower drop rate tho, so you may have better luck.




Here is a image of my attack on a level 10 Forest:
http://i695.photobucket.com/albums/v...6949/Evony.jpg

Rep me if this helped ya :cool:

Is there more to this guide, or is this it?

This might work against swordsmen but you definitely aren't going to get zero loss against cavalry or archers.

Quote:

---

Originally Posted by Birtles

This might work against swordsmen but you definitely aren't going to get zero loss against cavalry or archers.

---

This is right... But I never tried it with balistas, battering rams, or catapults... I usually try these on Barbarians...

What server?

Quote:

---

Originally Posted by captian virk

What server?

---

I think it doesn't matter what server it is from.

Quote:

---

Originally Posted by WN1 Hit

I think it doesn't matter what server it is from.

---

The title says how to take a level 10 valley, which I already know how to, but he is talking about medal drop rates and stuff.

This guide is horrible. First, level 10 valleys have Archers in them most of the time, which makes it impossible to have 0 loses no matter what troop you use. The mis-info in this guide is amazing.

Can a mod please close this?

Quote:

---

Originally Posted by captian virk

The title says how to take a level 10 valley, which I already know how to, but he is talking about medal drop rates and stuff.

---

lol oh... well i got the same thing... in WN1... i dunno about that person... and yes the guide is horrible... I would mostly find Calvs, and archers so 90% of the time you will lose some...

Quote:

---

Originally Posted by WN1 Hit

lol oh... well i got the same thing... in WN1... i dunno about that person... and yes the guide is horrible... I would mostly find Calvs, and archers so 90% of the time you will lose some...

---

Yea, my medal guide is better than this.(Not trying to sound full of myself)

<a href="http://s787.photobucket.com/albums/yy159/WN1_Hit/?action=view&current=example.jpg" target="_blank"><img src="http://i787.photobucket.com/albums/yy159/WN1_Hit/example.jpg" border="0" alt="pictureof evony"></a>

A PERFECT example of it.

I think the OP needs to think about this guide a bit more.

While yes this situation works against Swordsmen and Swordsmen alone, if you are facing Archers and/or Cavalry you are bound to take losses.

I am going to edit the first post, place a disclaimer stating this fact and message the OP to take some advice on level 10 valley's.

~JPA32

Wow....Are people really this stupid?

Let me boil down this guide.......You can use as few as 19k archers to take lvl 10 valleys so long as you use a hero with 100 attack and you scout the valleys first so you don't send them agains other archer or cav......

Second half....did 200 attacks and got these medals....

Don't attack valleys with cav or archer
Use 19000 archers
Use hero with 100+ attack

This guide is better than average, if you read the whole thing it works.
My one question is what server cause that does make a difference and was not posted.

Quote:

---

Originally Posted by SpamNEggs

Wow....Are people really this stupid?

Let me boil down this guide.......You can use as few as 19k archers to take lvl 10 valleys so long as you use a hero with 100 attack and you scout the valleys first so you don't send them agains other archer or cav......

---

Maybe you're simply more intelligent than the rest of us seeing as you read information that isn't even in the guide.

I have to agree with the comments here, this guide does not give any new and useful information.

To capture or win against any level 10 valley with zero losses is quite simple. Just scout level 10 valleys until you find one without cavalry or archers and send an appropriate number of archers with a decent hero. Fighting against archers or cavalry will always result in losses in valley fights.

Quote:

---

Originally Posted by SpamNEggs

Wow....Are people really this stupid?

Let me boil down this guide.......You can use as few as 19k archers to take lvl 10 valleys so long as you use a hero with 100 attack and you scout the valleys first so you don't send them agains other archer or cav......

Second half....did 200 attacks and got these medals....

Don't attack valleys with cav or archer
Use 19000 archers
Use hero with 100+ attack

This guide is better than average, if you read the whole thing it works.
My one question is what server cause that does make a difference and was not posted.

---

Your an idiot. First of all Hero's Attack doesn't matter or anything else with a hero. Yes it helps you win but its not a sure thing.

You will always have loses no matter what your facing; warriors, swordsman, whatever.This guide is wrong. And dont say I have a low archery or horseback riding or what ever. level 10 Archery, level 7 Horseback Riding....so bs.

To reduce losses against any opposition in a lvl 10 the 1,1,1 layer works simple, no losses are unlikely as stated above as unlikely there will be only swords you can stay scouting etc but its only a few losses thing you should only be owrried about taking these is minimise losses

As for medal hunting, npc's is always my advice on these but then again I'm on an older server so not my place

I agree with the majority here. This guide is sub-par.

While it is true that you can attack a valley that is just warriors and/or swords with 19k archers and a 100 attack hero to take it without losses, it doesn't really do much else. It doesn't explain that if you increase the number of archers to a higher number (say 35k) you can do the same thing with any hero provided you have good research.

It doesn't explain when to use pikemen, when to use a warrior bomb, or when to stripe the archers for minimal losses, all things that need to be covered for level 10 valleys in order to be a half-decent guide. It doesn't even mention that you should scout the valley before hand to determine what attack method you should use.

All in all, terrible guide with more missing information than anything else. Because of this guide alone maybe I'll write one myself to fill the void it has created.

If the OP does not come and edit his guide with new information or at least state that he is in the process of updating in a week then I will lock and archive this thread.

Starting now.

~JPA32

This server is 75

King, your guide is on how to take a level 10 valley, yet you do not go into very much detail.

You list no other valley defenses other then a swordsman pack which is rare for a level 10 valley. If you wish for this guide to be taken seriously you need to include attacks against Cavalry and Archers. Not only that, you haven't even edited the entire guide. You left several instances of "0 losses" when that is only true in this situation, and you haven't even listed important technology's that you undertook these tests with or any other amounts of Archers with lower attack heroes.

Please read tacomagic's post (middle paragraphs) for more information you could include in this guide. While I know you are trying to help, this guide isn't going to educate many players and may hurt them if they follow the advice wrong. If you are really interested in doing this then please give it the time it warrants. :)

~JPA32

Quote:

---

Originally Posted by JPA32

While yes this situation works against Swordsmen and Swordsmen alone, if you are facing Archers and/or Cavalry you are bound to take losses.

~JPA32

---

I would have to say that this is wrong, because I've no loss on any with my archers unless the valley have archers in it. If the valley have Cavalry in it then I just send 1 ram and 1 catapult with my 12k archers, 1 swordsman, 1pikemen, and 1 warrior.
But if you were talking about his strategy of attacking a valley with 19k archers then my mistake then.

Quote:

---

Originally Posted by Etopen

I would have to say that this is wrong, because I've no loss on any with my archers unless the valley have archers in it. If the valley have Cavalry in it then I just send 1 ram and 1 catapult with my 12k archers, 1 swordsman, 1pikemen, and 1 warrior.

(Removed screenshot)

Didn't put as an image because it was big and didn't want to put a big image in the thread.

But if you were talking about his strategy of attacking a valley with 19k archers then my mistake then.

---

Yes I was talking about the fact of attacking a valley with 19k Archers in that example. I know there are ways to get around taking losses using other methods,

Which is why my other post was encouraging the OP to show those ways. This could be helpful towards his guide if he decides to edit it again.

Quote:

---

Originally Posted by JPA32

Yes I was talking about the fact of attacking a valley with 19k Archers in that example. I know there are ways to get around taking losses using other methods,

Which is why my other post was encouraging the OP to show those ways. This could be helpful towards his guide if he decides to edit it again.

---

Oh I see, sorry about then. I'll just take the image off my previous post because I forgot to cross out the co-ordinate of my city.

Also I would like for you to edit your post to take off the image in the quote, thank you. It was my stupid mistake to leave the co-ordinate in the image.

Quote:

---

Originally Posted by Etopen

Oh I see, sorry about then. I'll just take the image off my previous post because I forgot to cross out the co-ordinate of my city.

Also I would like for you to edit your post to take off the image in the quote, thank you. It was my stupid mistake to leave the co-ordinate in the image.

---

No problem. :)

---I know the exercise table should not be trusted and as a general rule you should use 3-4x what it shows when waging an attack, but this is ridiculous.

http://battle48.evony.com/default.html?logfile/20091130/e6/7e/e67e3ed7e39561e00dd25c599eb44597.xml

Gonna lose some huh? 10k archers has always been used by many of us, there has

---Also, I can't read that photobucket crap half the time people post it so it's beyond me why people use that sh*tty site if they can't control the aspect ratio let alone the size of the image. The OP is the first in a while I have seen that was clear. If he had to really work at that, then photobucket isn't worth it... now for my pitch... lmao here is a default ULed image for when the server no longer carries my battle report.

http://i50.tinypic.com/kdopzb_th.jpg

WTF!

http://i50.tinypic.com/kdopzb.jpg

Are you serious? This is the dumbest guide I've seen...

EDIT:

Quote:

---

Originally Posted by Sir T. R. E. Jr.

---I know the exercise table should not be trusted and as a general rule you should use 3-4x what it shows when waging an attack, but this is ridiculous.

http://battle48.evony.com/default.html?logfile/20091130/e6/7e/e67e3ed7e39561e00dd25c599eb44597.xml

Gonna lose some huh? 10k archers has always been used by many of us, there has

---Also, I can't read that photobucket crap half the time people post it so it's beyond me why people use that sh*tty site if they can't control the aspect ratio let alone the size of the image. The OP is the first in a while I have seen that was clear. If he had to really work at that, then photobucket isn't worth it... now for my pitch... lmao here is a default ULed image for when the server no longer carries my battle report.

http://i50.tinypic.com/kdopzb_th.jpg

WTF!

http://i50.tinypic.com/kdopzb.jpg

---

by the way u shud probably scout BEFORE you attack and consider that cavs OWN archers like 1:10 or somethin like that lol so... that's ur fault for (1) not scouting and knowing game mechanics and (2) reading this guide lol

Quote:

---

Originally Posted by Fred Flintstone

Your an idiot. First of all Hero's Attack doesn't matter or anything else with a hero. Yes it helps you win but its not a sure thing.

You will always have loses no matter what your facing; warriors, swordsman, whatever.This guide is wrong. And dont say I have a low archery or horseback riding or what ever. level 10 Archery, level 7 Horseback Riding....so bs.

---

Umm... You say hero's attack doesn't matter but that it "it helps you win". So yes, I guess it WOULD matter.

I get 0 losses with warriors, swordsman, anything but cav or archers. Though I have been finding ways around that, or at least minimizing losses.

And lvl 7 HBR in a level 10 valley is low. I said it.

Mind telling us what your tech levels were?